https://craftwhack.com/how-to-make-a-balloon-sword/

Chevron bracelets are bright, cute, and the perfect accessory for whatever outfit on any day of the week. You tin't get a much more than coincidental, colorful look when it comes to jewelry, and they're also wonderfully inexpensive to brand. They brand swell gifts for that special someone also – a token of your friendship they can wear forever!

Yous Will Need:

Fortunately, chevron bracelets don't require a lot of materials, and if you're a crafty sort of person, y'all might already have some of them at home. If not, they're very readily available.

A tape measure
Precipitous scissors
Strong yarn or embroidery floss in two complementary colors
A safety pin

Footstep one: Cutting Your Cord

Measure out two pieces of your first colour, approximately 6-ft long. Do the same for your other colors. They should all be approximately the same length. Line them up so the ends match. It might seem like a lot of thread, but yous might be surprised by how quickly it'southward used upwards while making the bracelet.

Footstep 2: Tie A Loop

Fold your string in half and tie an overhand loop of around ½ inch almost the middle of the fold. An overhand knot is the best kind for this. Don't worry if the loop doesn't finish upward exactly in the heart of the fold, but get it shut if you tin can. You should take approximately the same lengths of thread on either side of your loop.

Step 3: Fasten The Loop

You need to secure the loop before you lot tin carry on working on the bracelet. Thread it over your safety pin and pin information technology to a fabric surface which won't pull around. Y'all might utilize a sofa cover, or fifty-fifty the leg of the pants you lot're wearing. Don't pin through the fabric yous're worried about damaging, though!

If you don't have suitable material available, you lot can tape the condom pin to a difficult surface, such as a folder or a clipboard.

Step 4: Arrange Your Threads

You have more than than one option here. You lot tin arrange the threads so that you have four of the aforementioned color on the inside and ii each of the other colors on the outside. This will give you a broad chevron effect when yous've finished.

For example, if you were making a blue and green bracelet, y'all would take: Blueish, blue, dark-green, green, greenish, light-green, blue, blue.

Alternatively, you tin can have the threads alternating. If you cull to do this, brand sure you still have matching colors on the outside. For this, you would have: Blue, green, blue, green, green, bluish, green, blue.

Step v: Beginning Knotting The Bracelet

Take the kickoff thread on the left-hand side in your mitt. Create an angle in it that allows y'all to make a "4" shape over the second thread. In one case you have done that, weave the showtime thread under the 2d thread and pull information technology up through the "four" and tug it to create the first half of your knot.

Over again, create a "4" shape, loop the kickoff thread under the second thread, and and so pull it up through the "iv" and tug it tight to complete the knot. This is known as a "forward knot" and it forms the foundation for what nosotros're going to exist doing for the whole bracelet.

Footstep 6: Continue Knotting The Next Threads

Have the beginning thread once again, and repeat the previous step but with the third thread, rather than the second i. You want to make two "4"s and tie ii knots over again, completing a forwards knot.
Echo this again with the 4th thread.

Stride 7: Brainstorm Knotting On The Other Side

At present you're going to do the same thing from the other side. Take the outermost thread on the right, loop it and then that information technology creates a backward "iv" shape over the next thread, so loop it nether the 2nd thread and pull it through the "4." Pull it tight and yous have created the first function of a "backward knot."

Repeat this and pull the knot tight. You lot have now fabricated a full backward knot.

Footstep 8: Continue Knotting On The Other Side

Repeat the to a higher place stride with the next two threads, knotting the threads firmly and evenly. Accept your time; it's important to make the bracelet look nifty and the knots even. You don't want to accept to undo the whole thing subsequently!

Step 9: Keep Knotting Both Forward And Backward Knots

The two threads in the center are now the two threads that started on the outside. Using those, tie either a forward or a backward knot. It doesn't matter which you cull, merely it'south best to keep doing the aforementioned throughout the bracelet to produce a polish look.

To do a forward knot, take the left-hand thread, create a "4" over the right-mitt thread, and knot it, then echo the step. To do a backward knot, practise the same affair but starting with the correct-paw thread, creating a backward "4" over the left-paw one.

At present, you should take a neat "five" of knots at the top of the bracelet, right past your loop and prophylactic pin.

Step 9: Start Repeating The Above Steps

Repeat the higher up steps to begin adding rows of knots to your bracelet. Endeavor to tie your knots firmly and tightly, keeping them as even as much as possible to give a smooth overall outcome to the bracelet. If you aren't happy with a knot, simply disengage it and endeavour over again; it's improve to fuss over a knot than to accept to undo it later.

Work slowly and methodically, and recall to do a double-knot for each thread. It helps to proceed the threads spread out then at that place isn't any confusion about which ane is which as you piece of work. This volition stop you from accidentally duplicating threads or mixing up the order.

Pause every so frequently to check that your colors are working correctly. Checking regularly will hateful you don't accept to undo a lot if y'all go wrong.

You should end upwardly with double rows of each color as you work, creating lovely stripes chevrons.

Step x: Complect The End

When you are happy with the length of your bracelet, dissever the threads into 2. Push button ane half to the side and work on the other half initially.

Accept ii threads from the half you're working on, and compression them together. Accept the other two threads and use them every bit individual threads. Complect them for three-4 inches, and so necktie a tight knot. Check yous're happy with information technology before you trim the ends.

Accept one-half of the threads you set bated and repeat the same process, trimming the ends off when you're done.

Read Related Topic: How to Brand a Paper Mache Mask

Step 11: Tie Information technology Off

Take the safety pin out of the loop; your bracelet is at present finished!

Fit the bracelet around your wrist or a friend'southward wrist, and then thread ane of your braided ends through the loop. Necktie it to the other braid, and adore your work.

Conclusion

You now take a cute chevron bracelet. You tin can repeat this in whatever colors or styles, or experiment with dissimilar braiding patterns one time you lot're feeling confident. These bracelets are swell fun to brand and can exist used equally thoughtful gifts for the people y'all dearest.

You May Also Like: How To Brand A Airship Sword

matthewsrosees.blogspot.com

Source: https://craftwhack.com/how-to-make-a-chevron-bracelet/